epoxy acrylate photocuring coating (II)
epoxy acrylate photocuring coating (II)
CAS:
Molecular Formula: C6H6O5
epoxy acrylate photocuring coating (II) - Names and Identifiers
epoxy acrylate photocuring coating (II) - Physico-chemical Properties
| Molecular Formula | C6H6O5 |
| Molar Mass | 158.10884 |
epoxy acrylate photocuring coating (II) - Introduction
Light curing epoxy acrylate coating (II) is a special coating with the following properties:
1. rapid curing: the use of ultraviolet light or visible light irradiation, can quickly occur photoinitiated polymerization, so as to achieve the effect of curing.
2. Good chemical resistance: light-cured epoxy acrylate coating (II) has excellent chemical resistance and can better resist the corrosion damage of solvents, acids and bases and other chemicals to the coating.
3. High gloss and transparency: The surface of the coating formed by the light curing reaction is flat and smooth, with high gloss and transparency, and can provide a good appearance effect for the coated article.
The main uses of photocurable epoxy acrylate coatings (II) include:
1. wood products coating: widely used in furniture, flooring, cabinets and other wood products surface protection and decoration.
2. Metal coating: used as a protective coating on the metal surface to prevent oxidation and corrosion.
3. Plastic coating: It can be used for surface decoration and protection of plastic products to improve the wear resistance and anti-aging performance of products.
In terms of preparation method, the photocurable epoxy acrylate coating (II) can be prepared by introducing appropriate acrylate monomers into the epoxy resin, and then adding appropriate photoinitiators and additives. Subsequently, the coating material is mixed and dispersed by appropriate process steps.
During use and operation, light-cured epoxy acrylate coating (II) requires attention to the following safety information:
1. Avoid contact with skin and eyes: contact with paint may cause irritation or allergic reactions, so wear appropriate personal protective equipment when handling.
2. good ventilation: in the process of mixing, coating or curing, keep the work area well ventilated to prevent harmful to human health.
3. Avoid prolonged exposure to light sources: light-curing coatings will cure quickly under ultraviolet or visible light irradiation, so avoid exposing the coating to light sources for a long time to avoid premature hardening.
4. Storage Note: The paint should be stored in a dry and cool place, and care should be taken to avoid mixing with other chemicals to avoid accidental chemical reactions.
these safety information is only a general recommendation, the specific operation and use should also follow the paint manufacturers to provide safe operation guidelines and product instructions.
1. rapid curing: the use of ultraviolet light or visible light irradiation, can quickly occur photoinitiated polymerization, so as to achieve the effect of curing.
2. Good chemical resistance: light-cured epoxy acrylate coating (II) has excellent chemical resistance and can better resist the corrosion damage of solvents, acids and bases and other chemicals to the coating.
3. High gloss and transparency: The surface of the coating formed by the light curing reaction is flat and smooth, with high gloss and transparency, and can provide a good appearance effect for the coated article.
The main uses of photocurable epoxy acrylate coatings (II) include:
1. wood products coating: widely used in furniture, flooring, cabinets and other wood products surface protection and decoration.
2. Metal coating: used as a protective coating on the metal surface to prevent oxidation and corrosion.
3. Plastic coating: It can be used for surface decoration and protection of plastic products to improve the wear resistance and anti-aging performance of products.
In terms of preparation method, the photocurable epoxy acrylate coating (II) can be prepared by introducing appropriate acrylate monomers into the epoxy resin, and then adding appropriate photoinitiators and additives. Subsequently, the coating material is mixed and dispersed by appropriate process steps.
During use and operation, light-cured epoxy acrylate coating (II) requires attention to the following safety information:
1. Avoid contact with skin and eyes: contact with paint may cause irritation or allergic reactions, so wear appropriate personal protective equipment when handling.
2. good ventilation: in the process of mixing, coating or curing, keep the work area well ventilated to prevent harmful to human health.
3. Avoid prolonged exposure to light sources: light-curing coatings will cure quickly under ultraviolet or visible light irradiation, so avoid exposing the coating to light sources for a long time to avoid premature hardening.
4. Storage Note: The paint should be stored in a dry and cool place, and care should be taken to avoid mixing with other chemicals to avoid accidental chemical reactions.
these safety information is only a general recommendation, the specific operation and use should also follow the paint manufacturers to provide safe operation guidelines and product instructions.
Last Update：2024-04-09 21:50:46
Supplier List
View History
epoxy acrylate photocuring coating (II)
9-[2-(乙氧羰基)苯基]-3,6-二(乙氨基)-2,7-二甲基吨钼酸钨酸磷酸盐
Ethyl pent-4-enoate, (Ethyl allylacetate
3-甲氧基-2-哌啶酮
2-辛烯(顺反异构体混合物)
[(1S)-3-甲基-1-[[(2R)-2-甲基环氧乙烷基]羰基]丁基]氨基甲酸叔丁酯
AMINOCYCLOHEXANE HYDROBROMIDE
DI-T-BUTYLPHOSPHINE
5-溴-3-氟吡啶
2-[(4-HYDROXYPHENYL)THIO]BUT-2-ENEDIOIC ACID
9-[2-(乙氧羰基)苯基]-3,6-二(乙氨基)-2,7-二甲基吨钼酸钨酸磷酸盐
Ethyl pent-4-enoate, (Ethyl allylacetate
3-甲氧基-2-哌啶酮
2-辛烯(顺反异构体混合物)
[(1S)-3-甲基-1-[[(2R)-2-甲基环氧乙烷基]羰基]丁基]氨基甲酸叔丁酯
AMINOCYCLOHEXANE HYDROBROMIDE
DI-T-BUTYLPHOSPHINE
5-溴-3-氟吡啶
2-[(4-HYDROXYPHENYL)THIO]BUT-2-ENEDIOIC ACID